Multi-layer Dry Damping Short stroke, considerable focal length, high short-focus and long-focus recognition, visible to the naked eye, linear zoom is enhanced and more convenient. Rotate the device to adjust the spot size.
DIP color temperature coupled with the single lamp knob dimming design can easily achieve single lampdimming, spot shaping and color temperature adjustment. It can be used alone or can alternatively be equipped with other dimming devices.
I .Adjust the aperture to the appropriate size, and facing thecenter of the irradiated object, adiust the sharpness to a reasonable degree, as shown in Fiqure 17.
II.Pull the four diaphragm sheets outward to the maximum, andthen push one by one vertically inward, to ensure that the cutsquare spot is smaller than the object to be illuminated. andadjust the sharpness of the aperture again until satisfactory, asshown in Fiqure 18.
III.lf the shape of the spot does not match the object to beilluminated, first loosen the hand screw at the red mark, rotate theblue part of the lens, adjust the edge of the spot to be parallel tothe edge of the object to be illuminated, and finally tighten thehand screw. As shown in Figure 19, the LOGO projection directionnot matching can also be adjusted to the ideal direction using thismethod.
IV.Stretch the diaphragm sheet one by one outward until the spotsize is substantially consistent with the obiect, as shown in Fiqure20. lf you are not satisfied with the effect, it is recommended torepeat the operation according to the above steps to bring up thespot effect you are happy with.
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
